|
PRESS RELEASE
RELEASE DATE: Tuesday, June 10, 2008 CONTACT: David C. Foerter, 202.457.0911
ICAC SUPPORTS NACAA IN ITS RELEASE OF INDUSTRIAL BOILER MODEL PERMIT GUIDANCE
NACAA Model Permit Guidance Tool Offers Reasonable, Flexible and Cost-Effective Emission Levels
Based on Technologies Available and Deployed for Years
Washington, D.C. The Institute of Clean Air Companies (ICAC), the national trade association representing companies that manufacture and supply stationary source air pollution control technology and monitoring systems, applauds the National Association of Clean Air Agencies (NACAA) leadership in the release of the Model Permit Guidance as an important tool to assist state and local control programs in developing effective and reasonable emission control programs to reduce hazardous air pollutants emitted by industrial boilers.
Following general failure this past year of the U.S. Environmental Protection Agency’s (EPA) Industrial Boiler NESHAP rulemaking process, NACAA acknowledged the need to create a strong but flexible tool to assist States and local permitting agencies in achieving effective and reasonable levels of reductions of hazardous air pollutants (HAPs) from industrial, commercial and institutional boilers. “There has been a virtual gridlock in applying available technologies and improving emissions, including hazardous air pollutants, on thousands of industrial boilers operating in the United States,” said David Foerter, the Executive Director for ICAC. “The NACAA Model Permit Guidance is an important tool to break that gridlock and restore a reasonable, sound and deliberate pathway for technology-based emissions improvements that can be applied by States and local governments,” said David Foerter.
Due to the failed Federal regulatory process, NACAA examined the operating experience of a diverse set of boilers to develop HAP emission level recommendations based on existing technology applications. “ICAC is aware, and NACAA has confirmed through a considerable data collection effort, that substantially low emission levels are already being achieved by new and mature industrial sources,” said David Foerter of ICAC. A wide mix of technology solutions are available and have demonstrated feasibility and reasonableness through the successful application on a broad range of boiler types and sizes, and operating on a variety of fuels, to reduce emissions at or below a range of emissions levels recommended by NACAA.
“We believe the NACAA Model Permit Guidance will serve as a valuable tool to States and local governments to fill the air quality void created by the failed Industrial Boiler MACT rule,“ said David Foerter of ICAC, “and our industry welcomes renewed opportunities to assist NACAA members and affected sources identify cost effective monitoring and control solutions.”
For more information on NACAA's Model Perit Guidance Tool, please visit: http://www.4cleanair.org/newsTop.asp#headline1
* * *
ICAC members are air pollution control and monitoring technology companies committed to working with and developing technology solutions for a broad spectrum of stakeholders to ensure clean air policy that promotes public health, environmental benefit, and industrial progress.
PRESS RELEASE
Release Date: February 26, 2008 Contact: David Foerter, 202.457.0911
INSTITUTE OF CLEAN AIR COMPANIES RELEASES GUIDELINES FOR EVALUATING AND SELECTING WET ELECTROSTATIC PRECIPITATOR EQUIPMENT
Washington, D.C. The Institute of Clean Air Companies, Inc. (ICAC), the national association of stationary source air pollution control and monitoring technology companies, releases guidance on how to purchase and compare bids of wet electrostatic precipitator (WESP) equipment for electric power and industrial applications. This guidance will improve the industry-accepted understanding of engineering principles and options for WESP designs, and support technology considerations in the bid-purchase process.
Although wet electrostatic precipitator technology has been applied since the early part of the 20th century, an increasing number of electric power and industrial applications are now requiring the installation of emissions control systems to address fine particulate and sulfuric acid mist emissions. This document was prepared by WESP manufacturers to help end users collect the necessary data to solicit bids from vendors, prepare bid documents, and evaluate bids received. Explanations and commentary are also included to aid the purchaser in writing complete specifications and properly define parameters needed for WESP design. The document furthers the contents of ICAC Bid Evaluation Form for Dry Electrostatic Precipitators, ICAC-EP-10, adopted in 1995, to focus on the requirements for wet electrostatic precipitator technology.
The Institute of Clean Air Companies, Inc. (ICAC) is the national trade association representing companies that supply stationary source air pollution monitoring and control systems, equipment, and services. ICAC was formed in 1960 to promote the understanding of air pollution control technologies and services and to improve engineering and technical standards within the industry. The Institute's mission is to assure a strong and workable air quality policy that promotes public health, environmental quality and industrial progress.
Contact ICAC at 202-457-0911 or icacinfo@icac.com to request a copy of the document. The document is available at no charge to ICAC members and government officials and for $20 to others.
|
